Beat your foreign competition by becoming a member!
Join our organization and beat your foreign competition!
The following members sell American Made Products in the Sports & Outdoors Category
One of the products Dangerfield Calls sells is Made in America Duck Calls. A more complete list of their products is provided by Made in America Secrets, to review their list click here.
For more information about Dangerfield Calls and its Made in the USA products see the following:
I strive to make a call that not only is pleasing to the eye but also mimics every note of the hen that still talks to me in my sleep. - John M. Dangerfield II
I craft Trumpet Calls, Pot Calls, Box Calls, and Crow Calls. I make a call that is not only pleasing to the eye but most importently mimics every note of the targeted species of game. Each of my calls is signed, dated and numbered.
The materials I use range from air-dried black cherry burl I personally cut on our family farm near Norway, South Carolina to certified pre-ban elephant ivory used to create mouthpieces of trumpet calls. I take pride in each call I craft and ensure they will Talk the Talk. I will not send any call out of the shop that I would not personally use to fool the intended game species. With the encouragement of family and friends I began to offer my calls to the discriminating hunter in the spring of 2010. Thus Dangerfield Calls began.
For more information about Dangerfield Calls and its Made in the USA products see the following:
I strive to make a call that not only is pleasing to the eye but also mimics every note of the hen that still talks to me in my sleep. - John M. Dangerfield II
I craft Trumpet Calls, Pot Calls, Box Calls, and Crow Calls. I make a call that is not only pleasing to the eye but most importently mimics every note of the targeted species of game. Each of my calls is signed, dated and numbered.
The materials I use range from air-dried black cherry burl I personally cut on our family farm near Norway, South Carolina to certified pre-ban elephant ivory used to create mouthpieces of trumpet calls. I take pride in each call I craft and ensure they will Talk the Talk. I will not send any call out of the shop that I would not personally use to fool the intended game species. With the encouragement of family and friends I began to offer my calls to the discriminating hunter in the spring of 2010. Thus Dangerfield Calls began.
One of the products Duluth Pack sells is Made in the USA Knife / Knives. A more complete list of their products is provided by Made in America Secrets, to review their list click here.
For more information about Duluth Pack and its Made in America products see the following:
For over 130 years, Duluth Pack has been located in Duluth, MN. Here we have been manufacturing high quality, built-to-last canvas and leather bags, packs, and outdoor gear in our century-old factory. At Duluth Pack, we maintain the handcrafted American made heritage, and one-customer-at-a-time way of doing business that we have always valued. Our craftsmen and women value and use the same artisanal techniques that we have used since our company began. We are proud to offer a lifetime guarantee on our craftsmanship and hardware of all our products. Our customers understand that our packs have the unique ability to capture stories and evoke memories, this is what makes Duluth Pack special.
Since 1882, Duluth Pack has grown into a worldwide organization. We sell our products to a global consumer through our flagship retail store in Duluth, MN, our online retail store, and a global network of dealers.
For more information about Duluth Pack and its Made in America products see the following:
For over 130 years, Duluth Pack has been located in Duluth, MN. Here we have been manufacturing high quality, built-to-last canvas and leather bags, packs, and outdoor gear in our century-old factory. At Duluth Pack, we maintain the handcrafted American made heritage, and one-customer-at-a-time way of doing business that we have always valued. Our craftsmen and women value and use the same artisanal techniques that we have used since our company began. We are proud to offer a lifetime guarantee on our craftsmanship and hardware of all our products. Our customers understand that our packs have the unique ability to capture stories and evoke memories, this is what makes Duluth Pack special.
Since 1882, Duluth Pack has grown into a worldwide organization. We sell our products to a global consumer through our flagship retail store in Duluth, MN, our online retail store, and a global network of dealers.
One of the products Eagle Claw sells is Made in America Action Sports. A more complete list of their products is provided by Made in America Secrets, to review their list click here.
For more information about Eagle Claw and its Made in the USA products see the following:
In the late 1920's Drew McGill and Stan Wright formed the Wright & McGill Co., for the tying of high grade fishing flies. Drew was on the upper Colorado River pursuing his favorite sport, fly fishing that magnificent stream.
It all happened when he stopped to light his pipe and take a short rest.
The morning's fishing had not been as good as it could have been, for it seemed that even though the rainbows and native Trout were rising, they were difficult to hook. While thinking of this and the ways that he could improve his fishing techniques, he watched the lazy circles of two large eagles. As he sat quietly enjoying this wilderness scene, one of the eagles slowly spiraled downward and landed beyond him in the top of a dead cottonwood, the tips of the bird's talons lightly gripping a weathered bare limb. His thoughts turned to the penetrating power of those lethal claws, and then to the penetrating power of the fishhooks he was using.
As the powerful bird took to the air, Drew took his fly and holding it by the tiny leader pulled it across the leather of his fishing creel. The point scraped along the leather, but did not penetrate. Using his fishing pliers, he changed the shape of the hook by slightly curving the point. He tried the fly again and found that, this time it would penetrate. He quickly modified several flies and was back on the stream. The results were encouraging, and he eagerly tested shapes and sizes until driven from the stream by an afternoon thunderstorm.
Returning to the fly factory in Denver, Drew started working to produce a fishhook design with greater penetrating power. A hook that would exert this power in the direct line of pull of the leader. From this research came a fishhook that had sweeping curves and sharper points. It was forged for strength and was double offset for greater hooking qualities. The hook's point was in direct line of pull and shaped like the talons of that mighty bird.
The rest is history.
This design quickly swept the country, for it offered the first improvement in fishhooks in hundreds of years.
When Drew and Stan sat down to name their new product, what else could it have been except Eagle Claw? That's how it all happened, and that's the story of the bird that built a fishhook business.
Snell Tying 295x180
In 1946, Wright & McGill Co. created a separate company to build and sell fishing rods, since the demand was high for recreational products, due to the end of World War II, and a market was open for fishing rods. Wright & McGill Rod Co. was formed with Drew McGill being a strong influence and president of the newly-formed company. He succeeded in leasing the entire operation of the Goodwin Granger Co., which was well established, and had a very high reputation for the building of bamboo rods. It was believed that because of the already well established manufacturing operation of Wright & McGill Co., they would do a better job maintaining the Granger reputation for quality than other competitors.
Wright & McGill Co. acquired the Granger building on Grant Street, the inventory of rods, blanks, raw bamboo, and other rod components. During the first year of production, Wright & McGill Co. produced its first and only catalog under this name. Later, the rods were incorporated into the general tackle catalog.
The Wright & McGill Co. no longer manufactures the Granger line of bamboo rods. Rods today are manufactured with graphite and fiberglass materials. Wright & McGill markets many models and styles of rods and reels under the Eagle Claw brand name and has continued to use the tradename Granger in their rod line. In 2004, a signature line or professionally endorsed rods was introduced. The Skeet Reese signature series of S-Curve rods became one of the hottest rods in the industries history. These rods also opened up the door for other anglers such as Rick Clunn, Trevor Storlie and Tony Roach to create a line of professional grade rods at a reasonable price to the consumer.
Lazer Sharp Fishhooks were introduced in 1985. Lazer Sharp fishhooks are ultra sharp, ultra smooth and ultra strong. This was considered to be the most important development in fishhooks since the invention of steel. Over the years this process has been improved and perfected giving anglers a fishhook that is consistently sharp and strong making Lazer Sharp the best hook for every fishing application.
Snell Tying Close 295x180
In 2002 the Wright & McGill Co. purchased the assets of Laker by Jadico and named the new company Laker Fishing Tackle. Laker Fishing Tackle is based in Camdenton, MO and specializes in importing a wide variety of products including rods, reels, tackle accessories and many products for private label programs with major retailers throughout the United States.
Also, in 2002 the Wright & McGill Co. started marketing a full line of Terminal Tackle products. This product line currently features over 1,500 items, such as fishing line, floats, swivels, sinkers, nets, scales, cricket tubes, tools and many other terminal accessories. Under the brand name of Eagle Claw, it is the only brand name in Terminal Tackle!
In 2003 the Wright & McGill Co. purchased Lightning Bait of Red Bluff, CA. Lightning Bait manufactured a line of bait and scent products under the brand names of Crave and Nitro. The bait line was part of the overall product mix until 2011 when it was phased out.
Lazer TroKar was introduced by the company in 2009, and was touted as the world's first Surgically Sharpened fishhook. Created with technology out of the medical supply field, Lazer TroKar quickly garnered the recognition as being the sharpest fishhook in the world.
For more information about Eagle Claw and its Made in the USA products see the following:
In the late 1920's Drew McGill and Stan Wright formed the Wright & McGill Co., for the tying of high grade fishing flies. Drew was on the upper Colorado River pursuing his favorite sport, fly fishing that magnificent stream.
It all happened when he stopped to light his pipe and take a short rest.
The morning's fishing had not been as good as it could have been, for it seemed that even though the rainbows and native Trout were rising, they were difficult to hook. While thinking of this and the ways that he could improve his fishing techniques, he watched the lazy circles of two large eagles. As he sat quietly enjoying this wilderness scene, one of the eagles slowly spiraled downward and landed beyond him in the top of a dead cottonwood, the tips of the bird's talons lightly gripping a weathered bare limb. His thoughts turned to the penetrating power of those lethal claws, and then to the penetrating power of the fishhooks he was using.
As the powerful bird took to the air, Drew took his fly and holding it by the tiny leader pulled it across the leather of his fishing creel. The point scraped along the leather, but did not penetrate. Using his fishing pliers, he changed the shape of the hook by slightly curving the point. He tried the fly again and found that, this time it would penetrate. He quickly modified several flies and was back on the stream. The results were encouraging, and he eagerly tested shapes and sizes until driven from the stream by an afternoon thunderstorm.
Returning to the fly factory in Denver, Drew started working to produce a fishhook design with greater penetrating power. A hook that would exert this power in the direct line of pull of the leader. From this research came a fishhook that had sweeping curves and sharper points. It was forged for strength and was double offset for greater hooking qualities. The hook's point was in direct line of pull and shaped like the talons of that mighty bird.
The rest is history.
This design quickly swept the country, for it offered the first improvement in fishhooks in hundreds of years.
When Drew and Stan sat down to name their new product, what else could it have been except Eagle Claw? That's how it all happened, and that's the story of the bird that built a fishhook business.
Snell Tying 295x180
In 1946, Wright & McGill Co. created a separate company to build and sell fishing rods, since the demand was high for recreational products, due to the end of World War II, and a market was open for fishing rods. Wright & McGill Rod Co. was formed with Drew McGill being a strong influence and president of the newly-formed company. He succeeded in leasing the entire operation of the Goodwin Granger Co., which was well established, and had a very high reputation for the building of bamboo rods. It was believed that because of the already well established manufacturing operation of Wright & McGill Co., they would do a better job maintaining the Granger reputation for quality than other competitors.
Wright & McGill Co. acquired the Granger building on Grant Street, the inventory of rods, blanks, raw bamboo, and other rod components. During the first year of production, Wright & McGill Co. produced its first and only catalog under this name. Later, the rods were incorporated into the general tackle catalog.
The Wright & McGill Co. no longer manufactures the Granger line of bamboo rods. Rods today are manufactured with graphite and fiberglass materials. Wright & McGill markets many models and styles of rods and reels under the Eagle Claw brand name and has continued to use the tradename Granger in their rod line. In 2004, a signature line or professionally endorsed rods was introduced. The Skeet Reese signature series of S-Curve rods became one of the hottest rods in the industries history. These rods also opened up the door for other anglers such as Rick Clunn, Trevor Storlie and Tony Roach to create a line of professional grade rods at a reasonable price to the consumer.
Lazer Sharp Fishhooks were introduced in 1985. Lazer Sharp fishhooks are ultra sharp, ultra smooth and ultra strong. This was considered to be the most important development in fishhooks since the invention of steel. Over the years this process has been improved and perfected giving anglers a fishhook that is consistently sharp and strong making Lazer Sharp the best hook for every fishing application.
Snell Tying Close 295x180
In 2002 the Wright & McGill Co. purchased the assets of Laker by Jadico and named the new company Laker Fishing Tackle. Laker Fishing Tackle is based in Camdenton, MO and specializes in importing a wide variety of products including rods, reels, tackle accessories and many products for private label programs with major retailers throughout the United States.
Also, in 2002 the Wright & McGill Co. started marketing a full line of Terminal Tackle products. This product line currently features over 1,500 items, such as fishing line, floats, swivels, sinkers, nets, scales, cricket tubes, tools and many other terminal accessories. Under the brand name of Eagle Claw, it is the only brand name in Terminal Tackle!
In 2003 the Wright & McGill Co. purchased Lightning Bait of Red Bluff, CA. Lightning Bait manufactured a line of bait and scent products under the brand names of Crave and Nitro. The bait line was part of the overall product mix until 2011 when it was phased out.
Lazer TroKar was introduced by the company in 2009, and was touted as the world's first Surgically Sharpened fishhook. Created with technology out of the medical supply field, Lazer TroKar quickly garnered the recognition as being the sharpest fishhook in the world.
One of the products Easton sells is Made in the USA Arrows. A more complete list of their products is provided by Made in America Secrets, to review their list click here.
For more information about Easton and its Made in America products see the following:
Since its beginnings in 1922, Easton has focused on offering innovative, high-quality products that enhance the end-user's sporting experience. Easton revolutionized the sport of archery by introducing straight, consistent aluminum arrows in the 1940s, and has been the world's leading archery innovator since that time. As the world leader, Easton shafts are used by more bowhunters, crossbowmen, 3D competitors, target shooters and Olympic archery competitors than all other brands combined.
Easton Outfitters provides tools and technologies to support serious hunters and outdoor adventurers with an outstanding array of advanced designs in tents, snowshoes, trekking equipment, shooting equipment and much more.
Beman is the all-carbon bowhunting solution. With Made In USA quality, Beman offers innovative, affordable bowhunting and target arrows for archers and crossbow enthusiasts.
Delta McKenzie is the premiere maker of 3D and recreational archery targets. Superior technology meets superior craftsmanship at Delta McKenzie, the first choice of the world's leading 3D tournament organizations.
Core4Element specializes in high performance hunting clothing. With high quality designs and impeccable workmanship, Core 4 clothing fits the Easton mold of higher performance, iconoclastic technology that presents a clear advantage over the status quo.
For more information about Easton and its Made in America products see the following:
Since its beginnings in 1922, Easton has focused on offering innovative, high-quality products that enhance the end-user's sporting experience. Easton revolutionized the sport of archery by introducing straight, consistent aluminum arrows in the 1940s, and has been the world's leading archery innovator since that time. As the world leader, Easton shafts are used by more bowhunters, crossbowmen, 3D competitors, target shooters and Olympic archery competitors than all other brands combined.
Easton Outfitters provides tools and technologies to support serious hunters and outdoor adventurers with an outstanding array of advanced designs in tents, snowshoes, trekking equipment, shooting equipment and much more.
Beman is the all-carbon bowhunting solution. With Made In USA quality, Beman offers innovative, affordable bowhunting and target arrows for archers and crossbow enthusiasts.
Delta McKenzie is the premiere maker of 3D and recreational archery targets. Superior technology meets superior craftsmanship at Delta McKenzie, the first choice of the world's leading 3D tournament organizations.
Core4Element specializes in high performance hunting clothing. With high quality designs and impeccable workmanship, Core 4 clothing fits the Easton mold of higher performance, iconoclastic technology that presents a clear advantage over the status quo.
One of the products Embee Sunshade sells is American Made Beach Umbrellas. A more complete list of their products is provided by Made in America Secrets, to review their list click here.
For more information about Embee Sunshade and its Made in America products see the following:
Embee Sunshade uses the best materials in making umbrellas.
We use drawn aluminum tubing ( NOT seamed) with a thick wall.
We use oil tempered spring wire for the ribs.
The runner that slides up and down the pole is nylon for strength and will not scratch the pole.
The top of each umbrella is finished with a strong die cast bell cap with a ring so that the umbrella can be hung up for storage.Compare this to imported umbrellas.
The tilt and crank handle are chrome plated . We use galvanized aircraft cable to raise and lower the crank style umbrellas.
We use heavy duty vinyl , acrylic , and vinyl coated mesh material for the umbrella cover.We can also manufacture umbrellas using material supplied by the customer.
Custom silk-screening is available on all umbrellas. Call for minimum quantity requirements. We can supply all sizes of umbrella frames, from 5-1/2' in diameter to 10' in diameter.
All of our umbrellas are made in our factory in Brooklyn , NY.
For more information about Embee Sunshade and its Made in America products see the following:
Embee Sunshade uses the best materials in making umbrellas.
We use drawn aluminum tubing ( NOT seamed) with a thick wall.
We use oil tempered spring wire for the ribs.
The runner that slides up and down the pole is nylon for strength and will not scratch the pole.
The top of each umbrella is finished with a strong die cast bell cap with a ring so that the umbrella can be hung up for storage.Compare this to imported umbrellas.
The tilt and crank handle are chrome plated . We use galvanized aircraft cable to raise and lower the crank style umbrellas.
We use heavy duty vinyl , acrylic , and vinyl coated mesh material for the umbrella cover.We can also manufacture umbrellas using material supplied by the customer.
Custom silk-screening is available on all umbrellas. Call for minimum quantity requirements. We can supply all sizes of umbrella frames, from 5-1/2' in diameter to 10' in diameter.
All of our umbrellas are made in our factory in Brooklyn , NY.