Beat your foreign competition by becoming a member!
Join our organization and beat your foreign competition!
The following members sell Made in the USA Products in the Contract Manufacturing Category
One of the products Rubber Cal sells is Made in America Rubber Flooring. A more complete list of their products is provided by Made in America Secrets, to review their list click here.
For more information about Rubber Cal and its Made in the USA products see the following:
Rubber Matting and Flooring
We offer a complete line of rubber mats which include green and recycled matting products for virtually any and all applications. Our Rubber Matting and Flooring line is a cost effective, warm, resilient, comfortable and durable alternative to hard and cold surfacing. Rubber-Cal products are used in applications such as commercial food & beverage locations, industrial drainage mats, commercial fitness flooring, home use gym mats, pet care facility floorings, playground surfacing, and many more.
Industrial Sheet Rubber
We carry a complete line of Sheet Rubber for sealing, protecting and cushioning. Rubber-Cal guarantees that our line of products will have uniform cure, smooth finish, longer lengths, wider widths and consistent gauge. We stock a variety of virgin rubber products such as Neoprene, Skirtboard, EPDM, Cloth Inserted sheet rubber, White Nitrile, Buna-N, and a variety of Silicone products. Our recycled rolled rubber products are available in widths as wide as 102 inches and in a variety of surface finishes.
Industrial Ducting (www.ducting.com):
Ducting.com is the address for the most complete catalog of duct and ducting products online. The most complete line of vacuum, material handling, high temperature fume & dust removal flexible duct hoses in the market, ranging in diameter size from 1 to 52 and in material type from Polyurethane, PVC, & thermoplastic rubber to vinyl. Our line is used by a wide range of industries such as woodworking, waste management, agriculture, construction, HVAC, automotive, and more.
Pavement Maintenance Parts:
We produce and stock a complete line of Street Sweeper Wear Parts for Tymco, Schwarze, Elgin, Broom Bear, Masco, Nitehawk and other street and parking lot sweeping equipment. We serve the entire 50 states, Canada, and Puerto Rico. In addition we will fabricate any rubber part for any street sweeping or snow plow machine. Our Rubber or Polyurethane snowplow blades are designed to fit any machines which use steel blades. Flexible blades made from rubber or polyurethane conform to road surfaces, minimize road damage, protect airport runway lights and highway lane markers and do not cause sparks.
Custom Products, Cutting, Fabrication and Slitting:
We offer custom fabrication of sheet rubber parts and products based on your specifications. Whether it be molded, extruded or hand fabricated, all we would need are your blueprints.
If any of our stocked sheet rubber rolls are not your desired widths, we would happily offer slitting services down to any required width, anything from 3/4 inch wide and up. We also offer die, water-jet or laser cutting services to meet your exact gasket or seal specifications. Just give us your dimensions and we will produce the part to your specs.
Rubber-Cal is an SBA Small Business Certified company.
For more information about Rubber Cal and its Made in the USA products see the following:
Rubber Matting and Flooring
We offer a complete line of rubber mats which include green and recycled matting products for virtually any and all applications. Our Rubber Matting and Flooring line is a cost effective, warm, resilient, comfortable and durable alternative to hard and cold surfacing. Rubber-Cal products are used in applications such as commercial food & beverage locations, industrial drainage mats, commercial fitness flooring, home use gym mats, pet care facility floorings, playground surfacing, and many more.
Industrial Sheet Rubber
We carry a complete line of Sheet Rubber for sealing, protecting and cushioning. Rubber-Cal guarantees that our line of products will have uniform cure, smooth finish, longer lengths, wider widths and consistent gauge. We stock a variety of virgin rubber products such as Neoprene, Skirtboard, EPDM, Cloth Inserted sheet rubber, White Nitrile, Buna-N, and a variety of Silicone products. Our recycled rolled rubber products are available in widths as wide as 102 inches and in a variety of surface finishes.
Industrial Ducting (www.ducting.com):
Ducting.com is the address for the most complete catalog of duct and ducting products online. The most complete line of vacuum, material handling, high temperature fume & dust removal flexible duct hoses in the market, ranging in diameter size from 1 to 52 and in material type from Polyurethane, PVC, & thermoplastic rubber to vinyl. Our line is used by a wide range of industries such as woodworking, waste management, agriculture, construction, HVAC, automotive, and more.
Pavement Maintenance Parts:
We produce and stock a complete line of Street Sweeper Wear Parts for Tymco, Schwarze, Elgin, Broom Bear, Masco, Nitehawk and other street and parking lot sweeping equipment. We serve the entire 50 states, Canada, and Puerto Rico. In addition we will fabricate any rubber part for any street sweeping or snow plow machine. Our Rubber or Polyurethane snowplow blades are designed to fit any machines which use steel blades. Flexible blades made from rubber or polyurethane conform to road surfaces, minimize road damage, protect airport runway lights and highway lane markers and do not cause sparks.
Custom Products, Cutting, Fabrication and Slitting:
We offer custom fabrication of sheet rubber parts and products based on your specifications. Whether it be molded, extruded or hand fabricated, all we would need are your blueprints.
If any of our stocked sheet rubber rolls are not your desired widths, we would happily offer slitting services down to any required width, anything from 3/4 inch wide and up. We also offer die, water-jet or laser cutting services to meet your exact gasket or seal specifications. Just give us your dimensions and we will produce the part to your specs.
Rubber-Cal is an SBA Small Business Certified company.
One of the products Signature Plates sells is Made in America Nameplates. A more complete list of their products is provided by Made in America Secrets, to review their list click here.
For more information about Signature Plates and its Made in the USA products see the following:
Signature Plates has long been known for providing custom metal nameplates. We stock over 130 different types of sheet metal. In addition to the standard brass, aluminum and plated steel, we also offer hard-to-find nickel silver, copper, anodized aluminum and stainless steel. From this variety of metals we can fabricate hundreds of different shapes with a selection of different processes to meet your nameplate needs.
Our custom name plate capabilities.
We offer multiple imprinting methods on all our metals a variety of industries. All of our manufacturing is proudly made in the USA. We are experts at chemical etching and our frosted gold brass is second to none. In addition to etching we screen print as well. We have numerous screen printing machines and can handle small and large runs alike. If you have a need for sublimation, we provide that service also. We have multiple sublimation printers and can accommodate most of your metal sublimation needs.
Our philosophy.
EDUCATE CUSTOMERS.
Our customers know their products ? we know our nameplates. We believe in educating customers on selecting the most effective materials and processes to meet their specifications, environments and budgets.
EMBRACE CUSTOMIZATION.
Our team loves a good challenge. We believe in working closely with our customers to build the best nameplate for their product and budget? no matter the size, shape, color or any other requested specification.
CRAFTMANSHIP IS KEY.
Craftsmen from Signature Plates create, build and inspect every nameplate created in our factory. Everyday we work to keep our commitment in making Signature Plates that serve as a first impression for our customers.
We are honored to be a partner in creating Signature Plates for our customers.
Signature Plates is proud to be a member and/or active exhibitor with the following associations that support the growth and advancement of manufacturing.
For more information about Signature Plates and its Made in the USA products see the following:
Signature Plates has long been known for providing custom metal nameplates. We stock over 130 different types of sheet metal. In addition to the standard brass, aluminum and plated steel, we also offer hard-to-find nickel silver, copper, anodized aluminum and stainless steel. From this variety of metals we can fabricate hundreds of different shapes with a selection of different processes to meet your nameplate needs.
Our custom name plate capabilities.
We offer multiple imprinting methods on all our metals a variety of industries. All of our manufacturing is proudly made in the USA. We are experts at chemical etching and our frosted gold brass is second to none. In addition to etching we screen print as well. We have numerous screen printing machines and can handle small and large runs alike. If you have a need for sublimation, we provide that service also. We have multiple sublimation printers and can accommodate most of your metal sublimation needs.
Our philosophy.
EDUCATE CUSTOMERS.
Our customers know their products ? we know our nameplates. We believe in educating customers on selecting the most effective materials and processes to meet their specifications, environments and budgets.
EMBRACE CUSTOMIZATION.
Our team loves a good challenge. We believe in working closely with our customers to build the best nameplate for their product and budget? no matter the size, shape, color or any other requested specification.
CRAFTMANSHIP IS KEY.
Craftsmen from Signature Plates create, build and inspect every nameplate created in our factory. Everyday we work to keep our commitment in making Signature Plates that serve as a first impression for our customers.
We are honored to be a partner in creating Signature Plates for our customers.
Signature Plates is proud to be a member and/or active exhibitor with the following associations that support the growth and advancement of manufacturing.
One of the products Spencer sells is American Made Extrusions. A more complete list of their products is provided by Made in America Secrets, to review their list click here.
For more information about Spencer and its Made in America products see the following:
Our Motto:
Excellence Through Continuous Improvement
Spencer Industries Incorporated is locally owned and operated.
COMPANY MILESTONES
1969 We began as Thermwood Corporation....
Thermwood Corporation was established in 1969 as a plastic thermoformer of wood grained product for the furniture industry, hence the name Thermwood. Thermwood developed the first commercial CNC machine tool control, and used it to build machinery to trim their thermoformed plastic parts. They then began to sell this trim equipment, and developed a market for trimming equipment in the industry.
1981 Our Company was Founded....
In 1981 Thermwood made a corporate decision to become a total automated company. Our company was founded by the purchase of the Thermoforming and Sheet Extrusion assets of Thermwood Corporation. Our first year of production took place in the Thermwood plant while we were in the process of building our new facility next door. Our company began with 58 employees, and today we have many of those same experienced employees still working with us.
1982 Our first year of Production....
We moved into the new plant, a facility of 68,000 square feet.
1985 & 1986 We Expanded our Facilities...
We made our first two building expansions to meet the needs of our customers.
1988 Assembly Division Added, began Twin Sheeting, Achieved Small Business Award....
In 1987, we created the opportunity to become involved in the manufacture of video camera (camcorder) carrying cases. One year later this growth resulted in the creation of our Assembly Division and the acquisition of the former Dale Cabinet plant. We started production of our Twin Sheeting process. As a result of these successes our Company was selected as our area's Small Business of the Year for 1988.
1989 Indiana's Small Business of Year Award...
Our Company achieved the great honor of being named the state of Indiana's Small Business of the Year by the Small Business Administration.
1994 Expanded CNC Trimming...
We made our 3rd building addition to accommodate more CNC trimming capacity.
1998 Expanded Office & Warehouse...
We made major expansions to both our offices and warehouse.
1999 Opened R&D Center & more Expansions...
With the purchase of a metal fabrication facility located next door, we opened our R&D center. That same year we added another expansion to our warehouse and manufacturing areas.
2000 Engineering & Warehouse Expansion...
We added a second floor to our offices to house our growing engineering department. We then, again, added another warehouse expansion.
2002 Opened facility in El Paso...
By 2002, our single and twin-sheet projection TV back business had grown to the point that we opened a thermoforming facility in El Paso, TX to support our Mexico operation customers. Then, with the introduction of LCD and Plasma flat screen TV's, the projection industry started to become obsolete, and in 2005 we closed our El Paso location.
2003 Purchases for future expansions...
We purchased the neighboring Colonial Restaurant's building and land to allow future building expansions to our main facility. Also in 2003, we purchased from Kimball International, their Logistics Division which included 90,000 square feet and 109 acres located just across the street from our main facility.
2005 Additional Warehouse added...
Once again, we added another warehouse expansion to our headquarters.
2008 Purchased Facility in Hapmton, SC...
We purchased from T.O. Plastics, their Hampton, SC thermoforming location. We added more equiptment and are running multi-shift production.
Today with many expansions and three locations in Dale, Indiana, plus one in Hampton, South Carolina we have over 440,000 square feet to help support our customers' needs.
For more information about Spencer and its Made in America products see the following:
Our Motto:
Excellence Through Continuous Improvement
Spencer Industries Incorporated is locally owned and operated.
COMPANY MILESTONES
1969 We began as Thermwood Corporation....
Thermwood Corporation was established in 1969 as a plastic thermoformer of wood grained product for the furniture industry, hence the name Thermwood. Thermwood developed the first commercial CNC machine tool control, and used it to build machinery to trim their thermoformed plastic parts. They then began to sell this trim equipment, and developed a market for trimming equipment in the industry.
1981 Our Company was Founded....
In 1981 Thermwood made a corporate decision to become a total automated company. Our company was founded by the purchase of the Thermoforming and Sheet Extrusion assets of Thermwood Corporation. Our first year of production took place in the Thermwood plant while we were in the process of building our new facility next door. Our company began with 58 employees, and today we have many of those same experienced employees still working with us.
1982 Our first year of Production....
We moved into the new plant, a facility of 68,000 square feet.
1985 & 1986 We Expanded our Facilities...
We made our first two building expansions to meet the needs of our customers.
1988 Assembly Division Added, began Twin Sheeting, Achieved Small Business Award....
In 1987, we created the opportunity to become involved in the manufacture of video camera (camcorder) carrying cases. One year later this growth resulted in the creation of our Assembly Division and the acquisition of the former Dale Cabinet plant. We started production of our Twin Sheeting process. As a result of these successes our Company was selected as our area's Small Business of the Year for 1988.
1989 Indiana's Small Business of Year Award...
Our Company achieved the great honor of being named the state of Indiana's Small Business of the Year by the Small Business Administration.
1994 Expanded CNC Trimming...
We made our 3rd building addition to accommodate more CNC trimming capacity.
1998 Expanded Office & Warehouse...
We made major expansions to both our offices and warehouse.
1999 Opened R&D Center & more Expansions...
With the purchase of a metal fabrication facility located next door, we opened our R&D center. That same year we added another expansion to our warehouse and manufacturing areas.
2000 Engineering & Warehouse Expansion...
We added a second floor to our offices to house our growing engineering department. We then, again, added another warehouse expansion.
2002 Opened facility in El Paso...
By 2002, our single and twin-sheet projection TV back business had grown to the point that we opened a thermoforming facility in El Paso, TX to support our Mexico operation customers. Then, with the introduction of LCD and Plasma flat screen TV's, the projection industry started to become obsolete, and in 2005 we closed our El Paso location.
2003 Purchases for future expansions...
We purchased the neighboring Colonial Restaurant's building and land to allow future building expansions to our main facility. Also in 2003, we purchased from Kimball International, their Logistics Division which included 90,000 square feet and 109 acres located just across the street from our main facility.
2005 Additional Warehouse added...
Once again, we added another warehouse expansion to our headquarters.
2008 Purchased Facility in Hapmton, SC...
We purchased from T.O. Plastics, their Hampton, SC thermoforming location. We added more equiptment and are running multi-shift production.
Today with many expansions and three locations in Dale, Indiana, plus one in Hampton, South Carolina we have over 440,000 square feet to help support our customers' needs.
One of the products Strong Hold sells is American Made Custom Cabinets. A more complete list of their products is provided by Made in America Secrets, to review their list click here.
For more information about Strong Hold and its Made in America products see the following:
In 1993, we set out to design the ultimate industrial storage product. Our vision was to manufacture a product capable of withstanding the treatment common to an industrial environment. Included in this vision was the need to securely store heavy tools and valuables. Strong Hold Products is the realization of this vision. Our storage cabinets, lockers, shop desks, and related products are the strongest, most secure in the marketplace. Our products can be found in manufacturing, warehousing, pharmaceutical, financial, and educational facilities throughout the U.S. Our determination doesn't stop here.We continue to meet the ever changing needs of the most important people we know, our customers!
Strong Hold Products is committed to achieving total customer satisfaction. Implementing and maintaining an efficient, effective quality management system can aide us in achieving this goal. This can be accomplished through the continuous improvement of our manufacturing process, ongoing training of our employees and dedication to understanding our customers' needs.
CHECK OUT OUR OTHER DIVISIONS...
Fabricated Metals Logo Utility Metals Logo
ABOUT OUR PRODUCTS
DURABLE - Strong Hold Products' production team is dedicated to providing the most durable cabinet available today. Twelve-gauge steel is sheared, formed, welded, steam-cleaned then painted to produce a solid, strong and dependable cabinet. Our product is designed to withstand years of industrial abuse and tough treatment.
FAST - Our products are shipped completely assembled and ready to use. There is no lost time for shelf installation or setup.
ECONOMICAL - Our production methods allow us to pass savings on to you. Strong Hold Products' cabinets are comparably priced to competing light gauge steel cabinets, yet provide a far superior, lasting product. There are no minimum order quantities at Strong Hold Products.
SECURE - Our three point locking system is designed for a heavy padlock. This feature, along with our cast iron handle, padlock tang, 3/8 angle receiver, and 8-gauge hinge, compliments the 12-gauge welded body design.
For more information about Strong Hold and its Made in America products see the following:
In 1993, we set out to design the ultimate industrial storage product. Our vision was to manufacture a product capable of withstanding the treatment common to an industrial environment. Included in this vision was the need to securely store heavy tools and valuables. Strong Hold Products is the realization of this vision. Our storage cabinets, lockers, shop desks, and related products are the strongest, most secure in the marketplace. Our products can be found in manufacturing, warehousing, pharmaceutical, financial, and educational facilities throughout the U.S. Our determination doesn't stop here.We continue to meet the ever changing needs of the most important people we know, our customers!
Strong Hold Products is committed to achieving total customer satisfaction. Implementing and maintaining an efficient, effective quality management system can aide us in achieving this goal. This can be accomplished through the continuous improvement of our manufacturing process, ongoing training of our employees and dedication to understanding our customers' needs.
CHECK OUT OUR OTHER DIVISIONS...
Fabricated Metals Logo Utility Metals Logo
ABOUT OUR PRODUCTS
DURABLE - Strong Hold Products' production team is dedicated to providing the most durable cabinet available today. Twelve-gauge steel is sheared, formed, welded, steam-cleaned then painted to produce a solid, strong and dependable cabinet. Our product is designed to withstand years of industrial abuse and tough treatment.
FAST - Our products are shipped completely assembled and ready to use. There is no lost time for shelf installation or setup.
ECONOMICAL - Our production methods allow us to pass savings on to you. Strong Hold Products' cabinets are comparably priced to competing light gauge steel cabinets, yet provide a far superior, lasting product. There are no minimum order quantities at Strong Hold Products.
SECURE - Our three point locking system is designed for a heavy padlock. This feature, along with our cast iron handle, padlock tang, 3/8 angle receiver, and 8-gauge hinge, compliments the 12-gauge welded body design.
One of the products Tallahassee Welding sells is American Made Welding. A more complete list of their products is provided by Made in America Secrets, to review their list click here.
For more information about Tallahassee Welding and its Made in the USA products see the following:
Tallahassee Welding and Machine Shop, Inc., is family owned and has been operating since 1942.
We are a miscellaneous metals fabricator with architectural steel capabilities. We also have a fully-equipped machine shop. Through prompt service, immediate attention, high quality, and dedicated personnel we have become an industry leader.
Depend upon Tallahassee Welding and Machine Shop for all your plate or architectural fabrication requirements from raw material to finished product.
We thrive on the tough challenges of the out of the ordinary project. Accomplishing difficult and challenging projects on time is nothing new here at Tallahassee Welding and Machine Shop. We have a strong record of this performance over the past sixty years.
Whether it is a hard bid from construction documents, a rough sketch or a hand drawn sketch from the site and faxed over you will receive the best estimate possible. We also are capable of working with design/ build project demands.
For more information about Tallahassee Welding and its Made in the USA products see the following:
Tallahassee Welding and Machine Shop, Inc., is family owned and has been operating since 1942.
We are a miscellaneous metals fabricator with architectural steel capabilities. We also have a fully-equipped machine shop. Through prompt service, immediate attention, high quality, and dedicated personnel we have become an industry leader.
Depend upon Tallahassee Welding and Machine Shop for all your plate or architectural fabrication requirements from raw material to finished product.
We thrive on the tough challenges of the out of the ordinary project. Accomplishing difficult and challenging projects on time is nothing new here at Tallahassee Welding and Machine Shop. We have a strong record of this performance over the past sixty years.
Whether it is a hard bid from construction documents, a rough sketch or a hand drawn sketch from the site and faxed over you will receive the best estimate possible. We also are capable of working with design/ build project demands.