One of the products High Sierra Showerheads sells is Made in America Showerheads / Shower Heads. A more complete list of their products is provided by Made in America Secrets, to review their list click here.
For more information about High Sierra Showerheads and its American Made products see the following:
Without noise or temperature drops, a 1.5 gpm* stream is transformed into a full coverage spray of rain-like droplets with just the right force for showering and rinsing hair. Although the HighSierra Showerhead? flow is 40% less than traditional low flow showerheads, they are even less likely to plug. This is because the recently patented design creates a wide spray using a single orifice rather than many tiny orifices.
Incredibly, the plugging problem of low flow showerheads is not limited to the orifices alone. Nearly all of our competitors' models come equipped with the same pressure regulator design that directs water flowing into the showerhead through a narrow gap between a flattened 0-ring and a plastic ring (see Photo B below).
This gap will likely plug before the showerhead does. The HighSierra Showerhead? pressure regulator is the only one in the industry that regulates the flow of its showerheads using a time-tested single hole, conically shaped diaphragm with plenty of space for solids to pass through.
The new HighSierra Showerheads? LLC brand of 1.5 gpm*, water-saving shower heads is the first in the world to completely discard the old-fashioned ways of producing a low flow shower. That is because the decades-old methods of creating sprays (namely using multiple orifices or injecting air) just do not work when flows are reduced to under 2 gpm.
HighSierra Showerheads? utilize a new green technology (FCS?) that produces a luxurious-feeling spray from only 1.5 gpm* without plugging, making noise, or creating temperature drops. It is truly an amazing shower experience.
* Accuracy of flow rate is ? 10% between 30 psi and 80 psi
Ready to buy a HighSierra? Go to our products page, explore, and choose your style.
Small carbon footprint:
At about 2.5 inches long and 1 inch wide, this mighty mite uses less material and energy in its manufacture -- and it won't crowd a smaller shower area.
Non-plugging Design:
No need for gimmicky self-cleaning features with the FCS? Technology. Water passageways are so large that they do not plug and do not need cleaning.
Pressure-compensating Flow Control:
Maintains constant 1.5 gpm* flow at varying pressures.
Small carbon footprint:
At about 2.5 inches long and 1 inch wide, this mighty mite uses less material and energy in its manufacture -- and it won't crowd a smaller shower area.
Non-plugging Design:
No need for gimmicky self-cleaning features with the FCS? Technology. Water passageways are so large that they do not plug and do not need cleaning.
Pressure-compensating Flow Control:
Maintains constant 1.5 gpm* flow at varying pressures. Although the HighSierra Showerhead? flow is 40% less than traditional low flow showerheads, they are even less likely to plug. This is because the recently patented design creates a wide spray using a single orifice rather than many tiny orifices.
Incredibly, the plugging problem of low flow showerheads is not limited to the orifices alone. Nearly all of our competitors' models come equipped with the same pressure regulator design that directs water flowing into the showerhead through a narrow gap between a flattened 0-ring and a plastic ring (see Photo B below).
This gap will likely plug before the showerhead does. The HighSierra Showerhead? pressure regulator is the only one in the industry that regulates the flow of its showerheads using a time-tested single hole, conically shaped diaphragm with plenty of space for solids to pass through.
Without noise or temperature drops, a 1.5 gpm* stream is transformed into a full coverage spray of rain-like droplets with just the right force for showering and rinsing hair.
Small carbon footprint:
At about 2.5 inches long and 1 inch wide, this mighty mite uses less material and energy in its manufacture -- and it won't crowd a smaller shower area.
Non-plugging Design:
No need for gimmicky self-cleaning features with the FCS? Technology. Water passageways are so large that they do not plug and do not need cleaning.
Pressure-compensating Flow Control:
Maintains constant 1.5 gpm* flow at varying pressures. Although the HighSierra Showerhead? flow is 40% less than traditional low flow showerheads, they are even less likely to plug. This is because the recently patented design creates a wide spray using a single orifice rather than many tiny orifices.
Incredibly, the plugging problem of low flow showerheads is not limited to the orifices alone. Nearly all of our competitors' models come equipped with the same pressure regulator design that directs water flowing into the showerhead through a narrow gap between a flattened 0-ring and a plastic ring (see Photo B below).
This gap will likely plug before the showerhead does. The HighSierra Showerhead? pressure regulator is the only one in the industry that regulates the flow of its showerheads using a time-tested single hole, conically shaped diaphragm with plenty of space for solids to pass through.
The new HighSierra Showerheads? LLC brand of 1.5 gpm*, water-saving shower heads is the first in the world to completely discard the old-fashioned ways of producing a low flow shower. That is because the decades-old methods of creating sprays (namely using multiple orifices or injecting air) just do not work when flows are reduced to under 2 gpm.
HighSierra Showerheads? utilize a new green technology (FCS?) that produces a luxurious-feeling spray from only 1.5 gpm* without plugging, making noise, or creating temperature drops. It is truly an amazing shower experience.
* Accuracy of flow rate is ? 10% between 30 psi and 80 psi
For more information about High Sierra Showerheads and its American Made products see the following:
Without noise or temperature drops, a 1.5 gpm* stream is transformed into a full coverage spray of rain-like droplets with just the right force for showering and rinsing hair. Although the HighSierra Showerhead? flow is 40% less than traditional low flow showerheads, they are even less likely to plug. This is because the recently patented design creates a wide spray using a single orifice rather than many tiny orifices.
Incredibly, the plugging problem of low flow showerheads is not limited to the orifices alone. Nearly all of our competitors' models come equipped with the same pressure regulator design that directs water flowing into the showerhead through a narrow gap between a flattened 0-ring and a plastic ring (see Photo B below).
This gap will likely plug before the showerhead does. The HighSierra Showerhead? pressure regulator is the only one in the industry that regulates the flow of its showerheads using a time-tested single hole, conically shaped diaphragm with plenty of space for solids to pass through.
The new HighSierra Showerheads? LLC brand of 1.5 gpm*, water-saving shower heads is the first in the world to completely discard the old-fashioned ways of producing a low flow shower. That is because the decades-old methods of creating sprays (namely using multiple orifices or injecting air) just do not work when flows are reduced to under 2 gpm.
HighSierra Showerheads? utilize a new green technology (FCS?) that produces a luxurious-feeling spray from only 1.5 gpm* without plugging, making noise, or creating temperature drops. It is truly an amazing shower experience.
* Accuracy of flow rate is ? 10% between 30 psi and 80 psi
Ready to buy a HighSierra? Go to our products page, explore, and choose your style.
Small carbon footprint:
At about 2.5 inches long and 1 inch wide, this mighty mite uses less material and energy in its manufacture -- and it won't crowd a smaller shower area.
Non-plugging Design:
No need for gimmicky self-cleaning features with the FCS? Technology. Water passageways are so large that they do not plug and do not need cleaning.
Pressure-compensating Flow Control:
Maintains constant 1.5 gpm* flow at varying pressures.
Small carbon footprint:
At about 2.5 inches long and 1 inch wide, this mighty mite uses less material and energy in its manufacture -- and it won't crowd a smaller shower area.
Non-plugging Design:
No need for gimmicky self-cleaning features with the FCS? Technology. Water passageways are so large that they do not plug and do not need cleaning.
Pressure-compensating Flow Control:
Maintains constant 1.5 gpm* flow at varying pressures. Although the HighSierra Showerhead? flow is 40% less than traditional low flow showerheads, they are even less likely to plug. This is because the recently patented design creates a wide spray using a single orifice rather than many tiny orifices.
Incredibly, the plugging problem of low flow showerheads is not limited to the orifices alone. Nearly all of our competitors' models come equipped with the same pressure regulator design that directs water flowing into the showerhead through a narrow gap between a flattened 0-ring and a plastic ring (see Photo B below).
This gap will likely plug before the showerhead does. The HighSierra Showerhead? pressure regulator is the only one in the industry that regulates the flow of its showerheads using a time-tested single hole, conically shaped diaphragm with plenty of space for solids to pass through.
Without noise or temperature drops, a 1.5 gpm* stream is transformed into a full coverage spray of rain-like droplets with just the right force for showering and rinsing hair.
Small carbon footprint:
At about 2.5 inches long and 1 inch wide, this mighty mite uses less material and energy in its manufacture -- and it won't crowd a smaller shower area.
Non-plugging Design:
No need for gimmicky self-cleaning features with the FCS? Technology. Water passageways are so large that they do not plug and do not need cleaning.
Pressure-compensating Flow Control:
Maintains constant 1.5 gpm* flow at varying pressures. Although the HighSierra Showerhead? flow is 40% less than traditional low flow showerheads, they are even less likely to plug. This is because the recently patented design creates a wide spray using a single orifice rather than many tiny orifices.
Incredibly, the plugging problem of low flow showerheads is not limited to the orifices alone. Nearly all of our competitors' models come equipped with the same pressure regulator design that directs water flowing into the showerhead through a narrow gap between a flattened 0-ring and a plastic ring (see Photo B below).
This gap will likely plug before the showerhead does. The HighSierra Showerhead? pressure regulator is the only one in the industry that regulates the flow of its showerheads using a time-tested single hole, conically shaped diaphragm with plenty of space for solids to pass through.
The new HighSierra Showerheads? LLC brand of 1.5 gpm*, water-saving shower heads is the first in the world to completely discard the old-fashioned ways of producing a low flow shower. That is because the decades-old methods of creating sprays (namely using multiple orifices or injecting air) just do not work when flows are reduced to under 2 gpm.
HighSierra Showerheads? utilize a new green technology (FCS?) that produces a luxurious-feeling spray from only 1.5 gpm* without plugging, making noise, or creating temperature drops. It is truly an amazing shower experience.
* Accuracy of flow rate is ? 10% between 30 psi and 80 psi